clock oscillators [ programmable quick turn HB57 series 1.8 v 2.5 ma 8.0 ma 2.0 ma 8.5 ma current consumption supply current pll on : supply current [ 25.0 mhz ] [ 200.0 mhz ] [ 25.0 mhz ] [ 200.0 mhz ] low jitter. peak-to-peak period jitter is 70 ps typical 1.0 ~ 110.0 mhz applications smd cmos out p ut 7.0 x 5.0 x 1.8 mm features ultra small smd seam sealed clock crystal oscillator units. tri-state function available. output wave form cmos output short lead time. form 1 day to 1 week . low phase noise: -114 dbc/hz at 1 khz offs e custom frequencies can easily be configured 1.8v, 2.5v or 3.3v supply voltages. general specifications paramenters electrical spec. input voltage ( v dd ) 1.8 v 5 % frequency range output logic high " 1 " 1.62 v ( min. ) [ 90 % of v dd ] output logic low " 0 " 0.18 v ( max. ) [ 10 % of vdd ] output load 15 pf rise time ( tr ) / fall time ( tf ) duty cycle 50% 5% [ measured at 50% v dd ] 4.0 ns ( typ.) [ 25 mhz pll off ] 1.5 ns ( typ.) [ 200 mhz pll off ] commercial ( -1 0c to +70c ) a 50 ppm 100 ppm if non-standard , please enter the operating temperature range desired stability after the " c " or " i " outline dimensions ( unit : mm ) mercury www .mercury-crystal.com taiwan : (886)-2-2406-2779 / sales-tw@mercury-crystal.com u.s.a: (1)-909-466-0427 / sales-us@mercury-crystal.com china : (86)-512-5763-8100 / sales-cn@mecxtal.com bc for example : " c20 " 20 ppm over -10c to +70c ; industrial ( -40c to +85c ) def " i 20 " 20 ppm over -40c to +85c frequency stability (1) codes frequency stability over 25 ppm - 50c to 100c aging 3 ppm per year (max.) start - up time (ts) 5 m sec.( typical ) storage temperature
|
